| These
cylinder hones are applicable at portable drills, radial machines,
lathes etc. and are studied to hone from 25 mm to 500 mm (.99"
to 19,7") |
| COLMER
29 M |
|
| Diameter range in mm.:
Ø 25¸33 (.99"¸1.3") |
| |
Portable hone is made for two stone
sets each of them formed of 3 stone supports. It's right for working
little cylinder, brake and unusual pieces not repetitives. They utilize
supports "P13, P14".
SPARE PARTS: expansion rod "D50", expansion knob "DM40",
shaft extension mm 800 (31.5") "DM26". |
|
| COLMER
44 M |
|
| Diameter range in mm.:
Ø 31¸44 (1.2"¸1.7") |
| |
Portable hone is made for two stone
sets each of them formed of 2 stone supports + 2 guide shoe supprts.
It's right for not series working un hydraulic berings, motorcycles
etc.. They utilize supports "Q15, Q16".
SPARE PARTS: expansion rod, "C50", expansion knob"DM40",
shaft expansion mm 800 (31,5") "QM26". |
|
| COLMER
66 M |
|
| Diameter range in mm.:
Ø 44¸66 (1.7"¸2.7") |
| |
Portable hone is made for four
stone sets, each of them formed of 2 stone supports + 2 guide shoe
supports. It's right for working motorcycle's cylinders, hydraulic
cylinders etc.. They utilize stone series "M17, M18, M19,
M20".
SPARE PARTS: expansion rod, "B50", expansion knob"BM45",
shaft expansion mm 1.000 (39.4") "BM31". |
|
| COLMER
350 M |
|
| Diameter range in mm.:
Ø 63¸500 (2.5"¸19.7") |
| |
Portable hone very versatile. Is
used in any field, from motors grinding to construction of machines
tool, to working of hydraulic cylinders. This mandrel is made for
3 stone sets each of them formed of 2 stone supports + 2 guide shoe
supports "R4, R5, R6" for diameter range 63 mm. a
139 mm (2.5" to 5.45").
T his mandrel has suitable master holder sets ("N"),
stone supports ("S") and stone sets tipo "R7"
for increase the diamater to 500 mm (10.7").
SPARE PARTS: expansion pinion"AM60", toothed body gear "A35"
shaft expansion 1.000 mm (39.4") long "A51".
On request is available COLMER 350 ML
with a working diameter range from 63 mm a 139 mm. (2.5" to 5.45") |
|
| COLMER
350 MC |
|
| Diameter range in mm.:
Ø 63¸139 (2.5"¸5.45") |
| |
| Portable hone with
the same features like mod. COLMER 350M except the stone set is
longer 76 mm. (3.0") It' right for working blind holes and
short cylinders. They utilize stone series"C4, C5, C6".
SPARE PARTS: expansion pinion "AM60", tootthed body gear
"A35", shaft expansion da mm. 1.000, "A51".
On request is available COLMER 350 MLC
with the same technical features except
for the fork which is lighter. |
|
|
