| These
honers are applicable in honing machines BERCO, ZANROSSO, RUARO, ROBBI,
AMC, and permit to hone bores from diameter 25 mm to 500 mm (.99"
to 19.7"). They guarantee short working times and high precision
of the bores and low production cost. |
| COLMER
29 S |
|
| Diameter
range in mm.: Ø 25¸33 (.99"¸1.3") |
| |
Honer
with two stones sets each of them formed of 3 stones. It's right for
working little cylinder, brake and unusual pieces not repetitives.
They utilize supports"P13, P14".
SPARE PARTS: expansion rod "D50",internal shaft expansion
"DS25". |
|
| COLMER
44 S |
|
| Diameter
range in mm.: Ø 31¸44 (1.2"¸1.7") |
| |
Honer
with two stones sets each of them formed of 2 stones supports + 2
guide shoe supports. It's right for not series working un hydraulic
berings, motorcycles etc.. They utilize supports "Q15, Q16".
SPARE PARTS: expansion rod, "B50", internal shaft expansion
"CS25". |
|
| COLMER
66 S |
|
| Diameter
range in mm.: Ø 44¸66 (1.7"¸2.6") |
| |
Honer
with two stones sets each of them formed of 2 stones supports + 2
guide shoe supports. It's right for working motorcycle's cylinders,
hydraulic cylinders etc.. They utilize stone series "M17,
M18, M19, M20".
SPARE PARTS: expansion rod, "BS50", internal shaft expansion
"CS25"."BS 30". |
|
| COLMER
350 S |
|
| Diameter
range in mm.: Ø 63¸500 (2.5"¸19.7") |
| |
| Portable
hone very versatile. Is used in any field, from motors grinding
to construction of machines tool, to working of hydraulic cylinders.
This mandrel is made for 3 stone sets each of them formed of 2 stone
supports + 2 guide shoe supports "R4, R5, R6" for
diameter range 63 mm. a 139 mm (2.5" to 5.45").
T his mandrel has suitable master holder sets ("N"),
stone supports ("S") and stone sets tipo "R7"
for increase the diamater to 500 mm (10.7").
SPARE PARTS: expansion pinion"AS60", toothed body gear
"A35", internal shaft expansion "A50". |
|
| COLMER
350 SC |
|
| Diameter
range in mm.: Ø 63¸139 (2.5"¸19.7") |
| |
| Portable
hone with the same features like mod. COLMER 350 S except the stone
set is longer 76 mm. (3.0") It's right for working blind holes
and short cylinders. Utilize stone series"C4, C5, C6".
SPARE PARTS: expansion pinion "AS60", tootthed body gear
"A35", internal shaft expansion "A50". |
